Our Global Sales Director for PET & Co-injection Igor Kim talked to PETplanet about the PET Industry and our future plan on how we can better serve the market's demand.
Read the published interview here:
Does your food or beverage packaging need an oxygen barrier, light blocking, or carbon dioxide retention for extended shelf life? Are you molding a part that could be filled with regrind?
For years, the canned food industry has been dominated by metal.
When choosing a co-injection solution, there are a few different options available. You can buy a complete, turnkey co-injection system or you can retrofit an existing injection molding machine with a co-injection hot runner and auxiliary injection unit.
Hot runner technology, introduced to the plastics industry over 50 years ago, revolutionized injection molding processing capabilities by improving molded part quality, enhancing operational efficiencies, reducing scrap and saving money.
For years, natural balance has been the cornerstone of a successful hot runner balance. This means that the melt experiences the same flow length and the same diameter melt channels from when it leaves the machine nozzle until it enters each cavity within the mold.
All hot runner systems need a heat source to operate as designed, however not all hot runner systems are heated by the same methods. The type of heater technology your hot runner system uses can significantly affect molding performance, molded part quality and system cost.
All hot runner systems need a heat source to operate as designed, however not all hot runner systems use the same heating methods. The type of heater technology your hot runner system uses can significantly affect molding performance, part quality, and system cost.
Plastic components are in use by every industry and manufacturing these components through injection molding has come a long way. A wide range of equipment options exist depending on your application and capabilities.
Injection molding: A pellet goes in, and a few moments later a part comes out. Seems simple enough, but what really happens in between these points, and how can optimization of this process create value for you in your operation?